Ultralease EPX GP (formerly known as Ultra 4 Epoxy Parfilm) is a semi-permanent, solvent-based release agent formulated expressly for epoxy and thermoset resins and plastics. After application, Ultralease EPX rapidly dries at room temperature to a micro-thin and durable parting-film that will not transfer to product or inhibit post-mold painting or bonding. Repeated usage seal and protects the mould with minimal build-up.
FEATURES :
Rapid air drying and curing at room temperature, can be further accelerated with heat
Heat stable to 600F (315*C)
Little or no interference with painting, coating or bonding
In most cases, a single application provides release through numerous molding cycles
Seals and protects mold and yields longer life
NO Chlorinated Solvents, NO Class I or Class II Ozone Depleting Substances
Recommended Materials.
Epoxy resins, Epoxy molding compounds, phenolic resins, epoxy-based fiberglass and thermoset plastics
THERMOSETS:
Polyester, Epoxies, Silicone.
Driscoll Polyester Parfilm Ultra 4 Mold Release is a micro-thin film forming release agent impedes the degradation of the mold and yields longer mold life.