AF-7 Anti-Foaming Agent has been developed as an extremely effective, air release agent for Water Clear polyurethane material systems. Its purpose is to assist in the vacuum degassing procedure by reducing surface tension of entrained air bubbles in the mix. When stirred in to already mixed A & B components, the AF-7 Anti-Foaming Agent works to break the material surface tension. This product is sold in a pint/approx. 473ml in volume.
Note: AF-7 does not replace the need for pulling a vacuum on casting materials to eliminate air.
Previous product
Back to products
Apoxie Sculpt 4lbs
$195.50 (inc. gst)
Next product
Square Armature Wire
$82.80 (inc. gst)
AF-7 Anti-Foaming Agent
$69.00 (inc. gst)
Description
Related products
JA7 Alloy Stick
*** Our website cannot supply custom weights, only per/kg – contact our Henderson store for a specific weight, as the average JA7 stick is between 290-420 grams***
Omyacarb 40
Omyacarb is a Medium-ground calcium carbonate filler/extender suitable for most applications where a relatively coarse product is required.
Brass Powder
Brass powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
Isopropyl Alcohol
Isopropyl Alcohol is probably the most essential product to have on hand at any time, especially in the make-up kit.
D-Limonene 1L
DLIM-S
Iron Powder
Iron powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
JA8 Alloy Stick
*** Our website cannot supply custom weights, only per/kg – contact our Henderson store for a specific weight, as the average JA8 stick is between 250-400 grams***
AntiCrak Fibre 13mm 500g
The AntiCrak Fibre 13mm 500g is a premium Alkali-Resistant Fiber used for concrete crack control or gypsum casting. Low percentages
