Translucent, flowable, addition cure silicone which has an excellent mould life for use with polyurethane resins. Commonly used for concrete and plaster production.
Recommended for: Concrete, Plaster, Epoxy, Polyurethane, Polyester
Potlife & Demould: Work time – 60 mins / Demould time – 15-24 hrs
Hardness & Type: Shore A28 +/-2 Silicone Elastomer, 20000cps
Pourable, addition-curing, two component silicone rubber that cures at room temperature.
- Extremely Good Flow
- Low Shore A Hardness (approx 28)
- Fast non-shrink cure which can be accelerated considerably by the application of heat
- Excellent long-term stability of the mechanical properties of the cured rubber.
- High tear strength
- Outstanding resistance to casting resins.