A low strength addition curing, two component silicone rubber that cures at room temperature and features excellent flow due to its low viscosity, low tear strength, low elongation and excellent clarity. This is a great choice of product for simulating crushed or broken glass where hard and sharp products can be dangerous. Demould within the hour after mixing to prevent crumbling upon demoulding.
Previous product
Back to products
RTV3428 Translucent Flowable Silicone
$80.50 – $1,909.00 (inc. gst)
Next product
Pinkysil® - Fast Set Silicone
$57.50 – $2,760.00 (inc. gst)
Breakable Glass Silicone Rubber
$161.00 – $4,025.00 (inc. gst)
Related products
Light Green Patina
Light Green Patina is a cold patina for bronze, brass, and copper. Apply to a clean, cold (65°-70°F) metal. It
Rainbow Patina
N-RAINBOW-M
Isopropyl Alcohol
Isopropyl Alcohol is probably the most essential product to have on hand at any time, especially in the make-up kit.
Bronze Wool
N-BWOOL
Antiquing Patina
Antiquing Patina is used to create an aged brown to black finish on bronze, brass, and copper. On iron, steel
Bronze B Coating
The Metal Coatings are ground metal suspended in a non-toxic water based acrylic binder. They may be applied to both
Brass B Coating
The Metal Coatings are ground metal suspended in a non-toxic water based acrylic binder. They may be applied to both
Prime-It for Metal Coatings
When applying traditional or acid patinas to the Metal Coatings over iron, steel, or aluminum, a primer must first be
