PlatSil 71R Retarder slows the cure of PlatSil products. Adding 1% of 71R to the total mixed weight roughly doubles the pour time. Adding 2% of 71 R triples the pour time. Experiment to determine the amount that is best suited for your application. Do not exceed 4% as the system may not cure at all. NOTES: Add Part R to Part A prior to mixing with Part B.
PlatSil 71R Retarder
From $46.00
Related products
Forton MG
Forton MG (Forton Modified Gypsum) is a system whereby a polymer additive (Forton VF812) enhances the properties of the alpha
Eclipse Bangle Mould
MLD-B11
Surface Tissue
Surface tissue is used in the inner corrosion barrier to form a resin-rich layer, and also in the exterior layer
Chromax Dental Alginate
Chromax Dental Alginate is a high-precision dental alginate impression material with a chromatic phase and set indicator. This dental alginate
AntiCrak Fibre 13mm 500g
The AntiCrak Fibre 13mm 500g is a premium Alkali-Resistant Fiber used for concrete crack control or gypsum casting. Low percentages
Rounded Square Bangle Mould
MLD-B14
Plastic Putty Knife 3 inch
Plastic Putty Knives are the perfect tool for successfully mixing urethane or silicone in large volumes. Flat blade helps scrape
Classic Bangle Mould
MLD-B10
