PlatSil 71R Retarder slows the cure of PlatSil products. Adding 1% of 71R to the total mixed weight roughly doubles the pour time. Adding 2% of 71 R triples the pour time. Experiment to determine the amount that is best suited for your application. Do not exceed 4% as the system may not cure at all. NOTES: Add Part R to Part A prior to mixing with Part B.
PlatSil 71R Retarder
SKU: SR-PLATRET-S
$46.00 (inc. gst)
SKU: SR-PLATRET-S
Categories: Addition Cure Silicone, Moulding, Silicone Rubber
Related products
Icypole Sticks
From $6.90
Icy pole sticks for mixing resins, not recommended for silicone or viscous materials. Great for adding and blending liquid and
AntiCrak Fibre 13mm 500g
$40.25 (inc. gst)
The AntiCrak Fibre 13mm 500g is a premium Alkali-Resistant Fiber used for concrete crack control or gypsum casting. Low percentages
Long Plastic Stirrer
$5.18 (inc. gst)
Long plastic stirrers are designed for paint mixing but work well with resins and other materials.
Hanson Mixer
From $57.50
All purpose mixing blades that attach to a power drill to mix quantities of liquid. This brand mixes with less
Sale

Close
Small Carved Bangle Mould
Plastic Putty Knife 1.5 inch
From $1.73
Plastic Putty Knives are the perfect tool for successfully mixing urethane or silicone in large volumes. Flat blade helps scrape
Chopped Strand Mat 600gm
$12.65 (inc. gst)
Our CSM 600gm is an emulsion chopped strand mat made of randomly distributed chopped E-glass strands held together by an
Barnes 6L Vacuum System
$632.50 (inc. gst)
This vacuum degassing unit is designed to remove air from resin and silicone systems prior to pouring. It is a