PlatSil 71R Retarder slows the cure of PlatSil products. Adding 1% of 71R to the total mixed weight roughly doubles the pour time. Adding 2% of 71 R triples the pour time. Experiment to determine the amount that is best suited for your application. Do not exceed 4% as the system may not cure at all. NOTES: Add Part R to Part A prior to mixing with Part B.
PlatSil 71R Retarder
$46.00 (inc. gst)
Related products
Rounded Square Bangle Mould
MLD-B14
Plastic Drop Sheet
A Biodegradeable plastic drop sheet to help protect your work space. This sheet has dimensions of 2.6m x 3.6m
Brush Latex
***PLEASE DO NOT USE THIS FOR DIPPING – THIS IS A THICKENED FORMULA FOR BRUSHING***
Tongue Depressors Box 100/Box
Wooden tongue depressors allow for mixing of resins, silicones and blending pigments.
AntiCrak Fibre 13mm 500g
The AntiCrak Fibre 13mm 500g is a premium Alkali-Resistant Fiber used for concrete crack control or gypsum casting. Low percentages
Geltex Latex Thickener
Geltex Latex Thickener is used in latex moulding rubbers. Add up to 2% and shear mix until the desired consistency
Barnes 6L Vacuum System
This vacuum degassing unit is designed to remove air from resin and silicone systems prior to pouring. It is a
Glossy Cuff Bangle Mould
MLD-B13
