Our Medium Curve Ring Mould is a ready to use silicone mould that may be used with a variety of casting materials. An appropriate casting resin such as an epoxy or polyurethane is a popular choice, but other materials like wax may also be used. The mould was made from a ring which was originally sculpted from clay and is handmade in character. Note: all measurements are approximate. Due to the handmade nature of this mould, imperfections may exist in the mould and dimensions may change when cast piece is sanded.
Finish: Matte
Resin required to fill: Approx. 10ml
Ring size: P-Q
Previous product
Back to products
Slant Ring Mould
$28.75 (inc. gst) $17.25 (inc. gst)
Next product
Low Dome Ring Mould
$28.75 (inc. gst) $17.25 (inc. gst)
Medium Curve Ring Mould
$28.75 (inc. gst) $17.25 (inc. gst)
MLD-R3
Available at:
Auckland
Description
Related products
AntiCrak Fibre 13mm 500g
The AntiCrak Fibre 13mm 500g is a premium Alkali-Resistant Fiber used for concrete crack control or gypsum casting. Low percentages
Plastic Putty Knife 1.5 inch
Plastic Putty Knives are the perfect tool for successfully mixing urethane or silicone in large volumes. Flat blade helps scrape
Woven Bangle Mould
MLD-B1
Tongue Depressors Box 100/Box
Wooden tongue depressors allow for mixing of resins, silicones and blending pigments.
Plastic Putty Knife 3 inch
Plastic Putty Knives are the perfect tool for successfully mixing urethane or silicone in large volumes. Flat blade helps scrape
Liquid Latex
***ALSO REFERRED TO AS DIP OR SPRAY LATEX***
Small Carved Bangle Mould
MLD-B15
Rounded Square Bangle Mould
MLD-B14
