Our Low Dome Ring Mould is a ready to use silicone mould that may be used with a variety of casting materials. An appropriate casting resin such as an epoxy or polyurethane is a popular choice, but other materials like wax may also be used. The mould was made from a ring which was originally sculpted from clay and is handmade in character. Note: all measurements are approximate. Due to the handmade nature of this mould, imperfections may exist in the mould and dimensions may change when cast piece is sanded.
Finish: Gloss
Resin required to fill: Approx. 10ml
Ring size: O
Previous product
Back to products
Tom Thumb Ring Mould
$28.75 (inc. gst)
Next product
Dome Ring Variation No.4 Mould
$28.75 (inc. gst)
Low Dome Ring Mould
$28.75 (inc. gst)
MLD-R5
Available at:
Auckland
Description
Related products
Plastic Putty Knife 1.5 inch
Plastic Putty Knives are the perfect tool for successfully mixing urethane or silicone in large volumes. Flat blade helps scrape
Brush Latex
Brush latex is a moulding compound based on pre-vulcanized natural rubber latex. Pre-vulcanized latex is recommended for mould production as
Liquid Latex
Liquid Latex is still one of the most widely used materials for flexible mould making. This natural latex material has
Measuring Cup 60ml
These 60ml measuring cups can be used to measure small volumes of resin, silicone catalyst, or for decanting small volumes
Long Plastic Stirrer
Long plastic stirrers are designed for paint mixing but work well with resins and other materials.
Geltex Latex Thickener
Geltex Latex Thickener is used in latex moulding rubbers. Add up to 2% and shear mix until the desired consistency
Icypole Sticks
Icy pole sticks for mixing resins, not recommended for silicone or viscous materials. Great for adding and blending liquid and
Eclipse Bangle Mould
MLD-B11
