Our Medium Curve Ring Mould is a ready to use silicone mould that may be used with a variety of casting materials. An appropriate casting resin such as an epoxy or polyurethane is a popular choice, but other materials like wax may also be used. The mould was made from a ring which was originally sculpted from clay and is handmade in character. Note: all measurements are approximate. Due to the handmade nature of this mould, imperfections may exist in the mould and dimensions may change when cast piece is sanded.
Finish: Matte
Resin required to fill: Approx. 10ml
Ring size: P-Q
Previous product
Back to products
Slant Ring Mould
$28.75 (inc. gst) $17.25 (inc. gst)
Next product
Low Dome Ring Mould
$28.75 (inc. gst) $17.25 (inc. gst)
Medium Curve Ring Mould
$28.75 (inc. gst) $17.25 (inc. gst)
MLD-R3
Available at:
Auckland
Description
Related products
Surface Tissue
Surface tissue is used in the inner corrosion barrier to form a resin-rich layer, and also in the exterior layer
Liquid Latex
***ALSO REFERRED TO AS DIP OR SPRAY LATEX***
Chromax Dental Alginate
Chromax Dental Alginate is a high-precision dental alginate impression material with a chromatic phase and set indicator. This dental alginate
Icypole Sticks
Icy pole sticks for mixing resins, not recommended for silicone or viscous materials. Great for adding and blending liquid and
Plastic Putty Knife 3 inch
Plastic Putty Knives are the perfect tool for successfully mixing urethane or silicone in large volumes. Flat blade helps scrape
Barnes 6L Vacuum System
This vacuum degassing unit is designed to remove air from resin and silicone systems prior to pouring. It is a
Forton MG
Forton MG (Forton Modified Gypsum) is a system whereby a polymer additive (Forton VF812) enhances the properties of the alpha
Brush Latex
***PLEASE DO NOT USE THIS FOR DIPPING – THIS IS A THICKENED FORMULA FOR BRUSHING***
