The 70-25 Catalyst is designed to be used in conjunction with the TinSil 70-25 Silicone system. This Catalyst is usually measured at 10% by weight. If used at a higher or lower percentage, you may find changes to the silicones cured properties.
Previous product
Back to products
Platsil 73-60 20kg
$2,127.50 (inc. gst)
Next product
A07 300g Cartridge
$57.50 (inc. gst)
TinSil 70-25 Catalyst
$11.50 – $34.50 (inc. gst)
$5.75 – $17.25 (inc. gst)
Related products
Barnes 6L Vacuum System
This vacuum degassing unit is designed to remove air from resin and silicone systems prior to pouring. It is a
Forton MG
Forton MG (Forton Modified Gypsum) is a system whereby a polymer additive (Forton VF812) enhances the properties of the alpha
Glossy Cuff Bangle Mould
MLD-B13
Woven Bangle Mould
MLD-B1
Liquid Latex
Liquid Latex is still one of the most widely used materials for flexible mould making. This natural latex material has
Plastic Putty Knife 3 inch
Plastic Putty Knives are the perfect tool for successfully mixing urethane or silicone in large volumes. Flat blade helps scrape
Brush Latex
Brush latex is a moulding compound based on pre-vulcanized natural rubber latex. Pre-vulcanized latex is recommended for mould production as
Chromax Dental Alginate
Chromax Dental Alginate is a high-precision dental alginate impression material with a chromatic phase and set indicator. This dental alginate
