This is the brush we prefer to use when chopping our Stone Coat Countertop epoxy as well as brushing edges. Clean with Acetone and remove any loose bristles before using. This 2 x 2” Short Handled Chop Brush will greatly help with bubble dispersion when using Stone Coat Countertop Epoxy resin.
Previous product
Back to products
Flowcoat White
$57.50 – $161.00 (inc. gst)
Next product
Scrim
$5.75 – $368.00 (inc. gst)
Stone Coat Epoxy Chop Brush
$13.23 (inc. gst)
SC-CHOP
Available at:
Auckland
Related products
Surface Tissue
Surface tissue is used in the inner corrosion barrier to form a resin-rich layer, and also in the exterior layer
Forton MG
Forton MG (Forton Modified Gypsum) is a system whereby a polymer additive (Forton VF812) enhances the properties of the alpha
D-Limonene 1L
DLIM-S
Industrial Talc
Industrial Talc is a budget priced filler for reducing cost and exotherm in resins. Also used as a surface tension
Anti-Foaming Agent AF-7 Pint
AF-7 Anti-Foaming Agent has been developed as an extremely effective, air release agent for Water Clear polyurethane material systems. Its
Omyacarb 40
Omyacarb is a Medium-ground calcium carbonate filler/extender suitable for most applications where a relatively coarse product is required.
Copper Powder
Copper powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
Aluminium Granules
Aluminium Granules are commonly used as a filler in resin moulds for vacuum forming and low pressure injection. Imparts high
