Pure Lube Mould Soap is a versatile lubricant for use as a mould separator. A pure liquid (non-detergent) soap seperator, used as a release when casting plaster/gypsum into a plaster mould, and to prevent plaster/gypsum products from adhering to most porous surfaces. Pure Lube may be used at full strength or diluted with water. Apply witha clean sponge until foam appears, dab off excess and repeat the process until a sheen appears.
Previous product
Back to products
Resin Mould Wax 50g
$25.30 (inc. gst)
Next product
PVA Release
From $28.75
Pure Lube Mould Soap
$18.40 (inc. gst)
Related products
Langridge Dry Artist Pigment
Langridge Dry Artist Pigments offer gorgeous metallics, intense opaques and vibrant fluoros, that can be used to pigment our resin
Eye Dropper
Eyedroppers are ideal for adding liquid pigments to resins, or for creating effects in resin art using Isoproyl Alcohol or
Omyacarb 40
Omyacarb is a Medium-ground calcium carbonate filler/extender suitable for most applications where a relatively coarse product is required.
Brass Powder
Brass powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
Iron Powder
Iron powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
Isopropyl Alcohol
Isopropyl Alcohol is probably the most essential product to have on hand at any time, especially in the make-up kit.
JA7 Alloy Stick
*** Our website cannot supply custom weights, only per/kg – contact our Henderson store for a specific weight, as the average JA7 stick is between 290-420 grams***
JA6 Alloy Stick
*** Our website cannot supply custom weights, only per/kg – contact our Henderson store for a specific weight, as the average JA6 stick is between 220-310 grams***
