Pure Lube Mould Soap is a versatile lubricant for use as a mould separator. A pure liquid (non-detergent) soap seperator, used as a release when casting plaster/gypsum into a plaster mould, and to prevent plaster/gypsum products from adhering to most porous surfaces. Pure Lube may be used at full strength or diluted with water. Apply witha clean sponge until foam appears, dab off excess and repeat the process until a sheen appears.
Previous product
Back to products
Resin Mould Wax 50g
$25.30 (inc. gst)
Next product
PVA Release
From $28.75
Pure Lube Mould Soap
$18.40 (inc. gst)
Related products
AntiCrak Fibre 13mm 500g
The AntiCrak Fibre 13mm 500g is a premium Alkali-Resistant Fiber used for concrete crack control or gypsum casting. Low percentages
Industrial Talc
Industrial Talc is a budget priced filler for reducing cost and exotherm in resins. Also used as a surface tension
JA7 Alloy Stick
*** Our website cannot supply custom weights, only per/kg – contact our Henderson store for a specific weight, as the average JA7 stick is between 290-420 grams***
Hanson Mixer
All purpose mixing blades that attach to a power drill to mix quantities of liquid. This brand mixes with less
Q-Cel 520
Q-Cel 520 is a hollow glass micro-balloon which can be mixed with just about any resin. Q-Cel will make the
Aluminium Powder
Aluminium Powder is traditionally added to resins to aid in high temp applications such as vacuum forming. It is commonly
Omyacarb 40
Omyacarb is a Medium-ground calcium carbonate filler/extender suitable for most applications where a relatively coarse product is required.
Isopropyl Alcohol
Isopropyl Alcohol is probably the most essential product to have on hand at any time, especially in the make-up kit.
