Pure Lube Mould Soap is a versatile lubricant for use as a mould separator. A pure liquid (non-detergent) soap seperator, used as a release when casting plaster/gypsum into a plaster mould, and to prevent plaster/gypsum products from adhering to most porous surfaces. Pure Lube may be used at full strength or diluted with water. Apply witha clean sponge until foam appears, dab off excess and repeat the process until a sheen appears.
Previous product
Back to products
Resin Mould Wax 50g
$25.30 (inc. gst)
Next product
PVA Release
From $28.75
Pure Lube Mould Soap
$18.40 (inc. gst)
Related products
Barnes 6L Vacuum System
This vacuum degassing unit is designed to remove air from resin and silicone systems prior to pouring. It is a
AntiCrak Fibre 13mm 500g
The AntiCrak Fibre 13mm 500g is a premium Alkali-Resistant Fiber used for concrete crack control or gypsum casting. Low percentages
Omyacarb 40
Omyacarb is a Medium-ground calcium carbonate filler/extender suitable for most applications where a relatively coarse product is required.
Industrial Talc
Industrial Talc is a budget priced filler for reducing cost and exotherm in resins. Also used as a surface tension
Hanson Mixer
All purpose mixing blades that attach to a power drill to mix quantities of liquid. This brand mixes with less
AF-7 Anti-Foaming Agent
AF-7 Anti-Foaming Agent has been developed as an extremely effective, air release agent for Water Clear polyurethane material systems. Its
Forton MG
Forton MG (Forton Modified Gypsum) is a system whereby a polymer additive (Forton VF812) enhances the properties of the alpha
Epoxycast Clear Casting Resin
Epoxycast Clear Casting Resin Epoxycast Clear Casting Resin is a two-part, clear system specifically designed for casting small to medium-sized
