Pure Lube Mould Soap is a versatile lubricant for use as a mould separator. A pure liquid (non-detergent) soap seperator, used as a release when casting plaster/gypsum into a plaster mould, and to prevent plaster/gypsum products from adhering to most porous surfaces. Pure Lube may be used at full strength or diluted with water. Apply witha clean sponge until foam appears, dab off excess and repeat the process until a sheen appears.
- Sorry, this product cannot be purchased.
Previous product
Back to products
Resin Mould Wax 50g
$25.30 (inc. gst)
Next product
PVA Release
From $28.75
Pure Lube Mould Soap
$18.40 (inc. gst)
Related products
AntiCrak Fibre 13mm 500g
The AntiCrak Fibre 13mm 500g is a premium Alkali-Resistant Fiber used for concrete crack control or gypsum casting. Low percentages
Forton MG
Forton MG (Forton Modified Gypsum) is a system whereby a polymer additive (Forton VF812) enhances the properties of the alpha
AF-7 Anti-Foaming Agent
AF-7 Anti-Foaming Agent has been developed as an extremely effective, air release agent for Water Clear polyurethane material systems. Its
Industrial Talc
Industrial Talc is a budget priced filler for reducing cost and exotherm in resins. Also used as a surface tension
Brass Powder
Brass powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
Langridge Dry Artist Pigment
Langridge Dry Artist Pigments offer gorgeous metallics, intense opaques and vibrant fluoros, that can be used to pigment our resin
Isopropyl Alcohol
Isopropyl Alcohol is probably the most essential product to have on hand at any time, especially in the make-up kit.
Epoxyglass Clear Coating Epoxy Resin
EPOXYGLASS is a two part ultra clear epoxy coating resin used by professional artists and hobbyists Australia wide. EPOXYGLASS is
