Add UV additive to polyurethane liquid rubbers and plastics to improve exterior durability and reduce surface degradation caused by sunlight or other UV light sources. Add 0.5% of the total mix weight of the rubber or plastic. NOTES: Add UV Additive to Part B prior to mixing with Part A
Previous product
Back to products
TC892 Slow Set Rigid Polyurethane
From $207.00
Next product
Wax Fillet
From $218.50
Polyurethane UV Additive
From $103.50
Related products
Hanson Mixer
All purpose mixing blades that attach to a power drill to mix quantities of liquid. This brand mixes with less
JA12 Alloy Stick
*** Our website cannot supply custom weights, only per/kg – contact our Henderson store for a specific weight, as the average JA12 stick is between 210-280 grams***
Copper Powder
Copper powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
Chopped Strand Mat 300gm
Our CSM 300gm is an emulsion chopped strand mat made of randomly distributed chopped E-glass strands held together by an
Pipette Dispenser
An easy and economical way of measuring out those small amounts of MEKP catalyst and colouring resin among other applications.
Iron Powder
Iron powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
Omyacarb 40
Omyacarb is a Medium-ground calcium carbonate filler/extender suitable for most applications where a relatively coarse product is required.
Surface Tissue
Surface tissue is used in the inner corrosion barrier to form a resin-rich layer, and also in the exterior layer
