Add PolyFiber II to liquid polyurethane plastics or rubbers to thicken for brush-on application or to make mold shells. PolyFiber II turns a pourable rubber into a brushable system with any level of thickening desired – thin for a face coat or thicker for subsequent coats. PolyFiber II makes a pourable plastic, such as Easycast or TC808, into a highly versatile, brushable consistency for making lightweight mother moulds or mould jackets. Thickened plastics can also be used to create thin, lightweight, laid-up castings.
Previous product
Back to products
Contemporary Patination by Ron Young
$253.00 (inc. gst)
Next product
Cosclay Glow 226gm
$34.50 (inc. gst)
Polyfiber Thickener II
From $57.50
Related products
AF-7 Anti-Foaming Agent
AF-7 Anti-Foaming Agent has been developed as an extremely effective, air release agent for Water Clear polyurethane material systems. Its
D-Limonene 1L
DLIM-S
Industrial Talc
Industrial Talc is a budget priced filler for reducing cost and exotherm in resins. Also used as a surface tension
Megapour Deep Cast Epoxy Resin
Megapour Epoxy Resin Deep Casting System is an epoxy resin system specifically designed for deep pouring and large castings. It
Aluminium Powder
Aluminium Powder is traditionally added to resins to aid in high temp applications such as vacuum forming. It is commonly
Epoxycast Clear Casting Resin
Epoxycast Clear Casting Resin Epoxycast Clear Casting Resin is a two-part, clear system specifically designed for casting small to medium-sized
Surface Tissue
Surface tissue is used in the inner corrosion barrier to form a resin-rich layer, and also in the exterior layer
Isopropyl Alcohol
Isopropyl Alcohol is probably the most essential product to have on hand at any time, especially in the make-up kit.
