PlatSil Accelerator accelerates the pour times and demold times of PlatSil products. The addition of 1% Accelerator to the total mixed weight decreases the pour time to 1/3 the normal pour time. The addition of 2% decreases the normal pour time to 1/4. The addition of 3% decreases the normal pour time to 1/6. The demold time will also be reduced. Experiment on a small scale before making a larger mix. NOTES: Add Accelerator to Part B prior to mixing with Part A.
Previous product
Back to products
Geometric 8 Cavity Silicone Mould
$14.95 (inc. gst) $8.97 (inc. gst)
Next product
Platsil Gel-0030 Prosthetic Grade Silicone
$172.50 – $2,415.00 (inc. gst)
$138.00 – $1,932.00 (inc. gst)
$138.00 – $1,932.00 (inc. gst)
PlatSil Accelerator
$132.25 (inc. gst) $105.80 (inc. gst)
Related products
Plastic Putty Knife 3 inch
Plastic Putty Knives are the perfect tool for successfully mixing urethane or silicone in large volumes. Flat blade helps scrape
Classic Bangle Mould
MLD-B10
Barnes 6L Vacuum System
This vacuum degassing unit is designed to remove air from resin and silicone systems prior to pouring. It is a
AntiCrak Fibre 13mm 500g
The AntiCrak Fibre 13mm 500g is a premium Alkali-Resistant Fiber used for concrete crack control or gypsum casting. Low percentages
Eye Dropper
Eyedroppers are ideal for adding liquid pigments to resins, or for creating effects in resin art using Isoproyl Alcohol or
Plastic Cups
The plastic polypropylene cups are great for mixing resins and silicones, especially when you ant clarity and visibility of the
Geltex Latex Thickener
Geltex Latex Thickener is used in latex moulding rubbers. Add up to 2% and shear mix until the desired consistency
Plastic Putty Knife 2 inch
Plastic Putty Knives are the perfect tool for successfully mixing urethane or silicone in large volumes. Flat blade helps scrape
