PlatSil Accelerator accelerates the pour times and demold times of PlatSil products. The addition of 1% Accelerator to the total mixed weight decreases the pour time to 1/3 the normal pour time. The addition of 2% decreases the normal pour time to 1/4. The addition of 3% decreases the normal pour time to 1/6. The demold time will also be reduced. Experiment on a small scale before making a larger mix. NOTES: Add Accelerator to Part B prior to mixing with Part A.
Previous product
Back to products
Geometric 8 Cavity Silicone Mould
$14.95 (inc. gst) $8.97 (inc. gst)
Next product
Platsil Gel-0030 Prosthetic Grade Silicone
From $172.50
PlatSil Accelerator
$132.25 (inc. gst)
Related products
Classic Bangle Mould
MLD-B10
Forton MG
Forton MG (Forton Modified Gypsum) is a system whereby a polymer additive (Forton VF812) enhances the properties of the alpha
Chopped Strand Mat 600gm
Our CSM 600gm is an emulsion chopped strand mat made of randomly distributed chopped E-glass strands held together by an
Plastic Putty Knife 1.5 inch
Plastic Putty Knives are the perfect tool for successfully mixing urethane or silicone in large volumes. Flat blade helps scrape
Geltex Latex Thickener
Geltex Latex Thickener is used in latex moulding rubbers. Add up to 2% and shear mix until the desired consistency
Large Carved Bangle Mould
MLD-B16
Glossy Cuff Bangle Mould
MLD-B13
Rounded Square Bangle Mould
MLD-B14
