PlatSil Accelerator accelerates the pour times and demold times of PlatSil products. The addition of 1% Accelerator to the total mixed weight decreases the pour time to 1/3 the normal pour time. The addition of 2% decreases the normal pour time to 1/4. The addition of 3% decreases the normal pour time to 1/6. The demold time will also be reduced. Experiment on a small scale before making a larger mix. NOTES: Add Accelerator to Part B prior to mixing with Part A.
Previous product
Back to products
Geometric 8 Cavity Silicone Mould
$14.95 (inc. gst) $8.97 (inc. gst)
Next product
Platsil Gel-0030 Prosthetic Grade Silicone
From $172.50
PlatSil Accelerator
SKU: SR-PLATACC-S
$132.25 (inc. gst)
SKU: SR-PLATACC-S
Categories: Moulding, Silicone Rubber, Addition Cure Silicone
Related products
Plastic Putty Knife 1.5 inch
From $1.73
Plastic Putty Knives are the perfect tool for successfully mixing urethane or silicone in large volumes. Flat blade helps scrape
Barnes 6L Vacuum System
$632.50 (inc. gst)
This vacuum degassing unit is designed to remove air from resin and silicone systems prior to pouring. It is a
AntiCrak Fibre 13mm 500g
$40.25 (inc. gst)
The AntiCrak Fibre 13mm 500g is a premium Alkali-Resistant Fiber used for concrete crack control or gypsum casting. Low percentages
Surface Tissue
$7.48 (inc. gst)
Surface tissue is used in the inner corrosion barrier to form a resin-rich layer, and also in the exterior layer
Plastic Putty Knife 3 inch
From $2.30
Plastic Putty Knives are the perfect tool for successfully mixing urethane or silicone in large volumes. Flat blade helps scrape
Sale

Close
Woven Bangle Mould
Sale

Close
Classic Bangle Mould
Chromax Dental Alginate
$32.20 (inc. gst)
Chromax Dental Alginate is a high-precision dental alginate impression material with a chromatic phase and set indicator. This dental alginate