Flowcoat White is a waxed pigmented resin that is normally brushed on as a top sealing coat. Good for general fibreglass repairs or new parts as a topcoat sealer.
Flowcoat White gives a tidy UV protected surface and is commonly used in bilge/anchor/floors/pocket areas to give a tidy & clean finish.
Use between 1% to 2% hardener for volume/weight. 1kg will cover about 0.7m2 of clean & smooth fibreglass surface. 1kg = 750mls of product.
Previous product
Back to products
Petroleum Jelly
From $6.90
Next product
Stone Coat Epoxy Chop Brush
$13.23 (inc. gst)
Flowcoat White
$57.50 (inc. gst)
Description
Related products
Megapour Deep Cast Epoxy Resin
Megapour Epoxy Resin Deep Casting System is an epoxy resin system specifically designed for deep pouring and large castings. It
Forton MG
Forton MG (Forton Modified Gypsum) is a system whereby a polymer additive (Forton VF812) enhances the properties of the alpha
Epoxycast Clear Casting Resin
Epoxycast Clear Casting Resin Epoxycast Clear Casting Resin is a two-part, clear system specifically designed for casting small to medium-sized
Q-Cel 520
Q-Cel 520 is a hollow glass micro-balloon which can be mixed with just about any resin. Q-Cel will make the
Omyacarb 40
Omyacarb is a Medium-ground calcium carbonate filler/extender suitable for most applications where a relatively coarse product is required.
Surface Tissue
Surface tissue is used in the inner corrosion barrier to form a resin-rich layer, and also in the exterior layer
Barnes 6L Vacuum System
This vacuum degassing unit is designed to remove air from resin and silicone systems prior to pouring. It is a
Plastic Drop Sheet
A Biodegradeable plastic drop sheet to help protect your work space. This sheet has dimensions of 2.6m x 3.6m
