Flowcoat White is a waxed pigmented resin that is normally brushed on as a top sealing coat. Good for general fibreglass repairs or new parts as a topcoat sealer.
Flowcoat White gives a tidy UV protected surface and is commonly used in bilge/anchor/floors/pocket areas to give a tidy & clean finish.
Use between 1% to 2% hardener for volume/weight. 1kg will cover about 0.7m2 of clean & smooth fibreglass surface. 1kg = 750mls of product.
Previous product
Back to products
Petroleum Jelly
From $6.90
Next product
Stone Coat Epoxy Chop Brush
$13.23 (inc. gst)
Flowcoat White
From $57.50
Description
Related products
Hanson Mixer
All purpose mixing blades that attach to a power drill to mix quantities of liquid. This brand mixes with less
Anti-Foaming Agent AF-7 Pint
AF-7 Anti-Foaming Agent has been developed as an extremely effective, air release agent for Water Clear polyurethane material systems. Its
Surface Tissue
Surface tissue is used in the inner corrosion barrier to form a resin-rich layer, and also in the exterior layer
Iron Powder
Iron powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
Aluminium Granules
Aluminium Granules are commonly used as a filler in resin moulds for vacuum forming and low pressure injection. Imparts high
Omyacarb 40
Omyacarb is a Medium-ground calcium carbonate filler/extender suitable for most applications where a relatively coarse product is required.
Aluminium Powder
Aluminium Powder is traditionally added to resins to aid in high temp applications such as vacuum forming. It is commonly
AntiCrak Fibre 13mm 500g
The AntiCrak Fibre 13mm 500g is a premium Alkali-Resistant Fiber used for concrete crack control or gypsum casting. Low percentages
