Flowcoat White is a waxed pigmented resin that is normally brushed on as a top sealing coat. Good for general fibreglass repairs or new parts as a topcoat sealer.
Flowcoat White gives a tidy UV protected surface and is commonly used in bilge/anchor/floors/pocket areas to give a tidy & clean finish.
Use between 1% to 2% hardener for volume/weight. 1kg will cover about 0.7m2 of clean & smooth fibreglass surface. 1kg = 750mls of product.
Previous product
Back to products
Petroleum Jelly
From $6.90
Next product
Stone Coat Epoxy Chop Brush
$13.23 (inc. gst)
Flowcoat White
$57.50 (inc. gst)
Description
Related products
Hanson Mixer
All purpose mixing blades that attach to a power drill to mix quantities of liquid. This brand mixes with less
Pipette Dispenser
An easy and economical way of measuring out those small amounts of MEKP catalyst and colouring resin among other applications.
Iron Powder
Iron powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
Omyacarb 40
Omyacarb is a Medium-ground calcium carbonate filler/extender suitable for most applications where a relatively coarse product is required.
Aluminium Powder
Aluminium Powder is traditionally added to resins to aid in high temp applications such as vacuum forming. It is commonly
Epoxyglass Clear Coating Epoxy Resin
EPOXYGLASS is a two part ultra clear epoxy coating resin used by professional artists and hobbyists Australia wide. EPOXYGLASS is
Barnes 6L Vacuum System
This vacuum degassing unit is designed to remove air from resin and silicone systems prior to pouring. It is a
Industrial Talc
Industrial Talc is a budget priced filler for reducing cost and exotherm in resins. Also used as a surface tension
