Flowcoat White is a waxed pigmented resin that is normally brushed on as a top sealing coat. Good for general fibreglass repairs or new parts as a topcoat sealer.
Flowcoat White gives a tidy UV protected surface and is commonly used in bilge/anchor/floors/pocket areas to give a tidy & clean finish.
Use between 1% to 2% hardener for volume/weight. 1kg will cover about 0.7m2 of clean & smooth fibreglass surface. 1kg = 750mls of product.
Previous product
Back to products
Petroleum Jelly
From $6.90
Next product
Stone Coat Epoxy Chop Brush
$13.23 (inc. gst)
Flowcoat White
$57.50 (inc. gst)
Description
Related products
Q-Cel 520
Q-Cel 520 is a hollow glass micro-balloon which can be mixed with just about any resin. Q-Cel will make the
Barnes 6L Vacuum System
This vacuum degassing unit is designed to remove air from resin and silicone systems prior to pouring. It is a
Aluminium Granules
Aluminium Granules are commonly used as a filler in resin moulds for vacuum forming and low pressure injection. Imparts high
Chopped Strand Mat 600gm
Our CSM 600gm is an emulsion chopped strand mat made of randomly distributed chopped E-glass strands held together by an
Omyacarb 40
Omyacarb is a Medium-ground calcium carbonate filler/extender suitable for most applications where a relatively coarse product is required.
JA7 Alloy Stick
*** Our website cannot supply custom weights, only per/kg – contact our Henderson store for a specific weight, as the average JA7 stick is between 290-420 grams***
JA6 Alloy Stick
*** Our website cannot supply custom weights, only per/kg – contact our Henderson store for a specific weight, as the average JA6 stick is between 220-310 grams***
JA8 Alloy Stick
*** Our website cannot supply custom weights, only per/kg – contact our Henderson store for a specific weight, as the average JA8 stick is between 250-400 grams***
