No products in the cart.
Previous product
Back to products
Clear Guard Spray
$74.75 (inc. gst)
Next product
RD407 Mask Making Latex
From $69.00
Alumilite Resin Dye
$25.30 (inc. gst)
DescriptionUse smallest amount possible to achieve desired colour (up to 5%) Alumilite Dye is very concentrated. In some instances it’s necessary to use less than 1 drop to achieve colour in a small resin batch. This can be achieved by adding a drop of dye to the tip of a mixing stick rather than dispensing into the resin. Opaque dyes contain fillers that may settle in the bottle. To maintain consistent colour, agitate/stir prior to use.
Use Alumilite dyes to add colour to your casting resins! These opaque dyes may be used in both clear and opaque resins. Always conduct your own tests to see if the dye and resin combination achieve the colour you require!
Related products
Chopped Strand Mat 600gm
Our CSM 600gm is an emulsion chopped strand mat made of randomly distributed chopped E-glass strands held together by an
Forton MG
Forton MG (Forton Modified Gypsum) is a system whereby a polymer additive (Forton VF812) enhances the properties of the alpha
Brass Powder
Brass powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
Iron Powder
Iron powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
Isopropyl Alcohol
Isopropyl Alcohol is probably the most essential product to have on hand at any time, especially in the make-up kit.
Plastic Drop Sheet
A Biodegradeable plastic drop sheet to help protect your work space. This sheet has dimensions of 2.6m x 3.6m
Barnes 6L Vacuum System
This vacuum degassing unit is designed to remove air from resin and silicone systems prior to pouring. It is a
JA8 Alloy Stick
*** Our website cannot supply custom weights, only per/kg – contact our Henderson store for a specific weight, as the average JA8 stick is between 250-400 grams***
