Use Alumilite dyes to add colour to your casting resins! These opaque dyes may be used in both clear and opaque resins. Always conduct your own tests to see if the dye and resin combination achieve the colour you require!
Previous product
Back to products
Clear Guard Spray
$74.75 (inc. gst)
Next product
RD407 Mask Making Latex
From $69.00
Alumilite Resin Dye
$25.30 (inc. gst)
Description
Use smallest amount possible to achieve desired colour (up to 5%)
Alumilite Dye is very concentrated. In some instances it’s necessary to use less than 1 drop to achieve colour in a small resin batch. This can be achieved by adding a drop of dye to the tip of a mixing stick rather than dispensing into the resin.
Opaque dyes contain fillers that may settle in the bottle. To maintain consistent colour, agitate/stir prior to use.
Related products
Aluminium Granules
Aluminium Granules are commonly used as a filler in resin moulds for vacuum forming and low pressure injection. Imparts high
Surface Tissue
Surface tissue is used in the inner corrosion barrier to form a resin-rich layer, and also in the exterior layer
Industrial Talc
Industrial Talc is a budget priced filler for reducing cost and exotherm in resins. Also used as a surface tension
Q-Cel 520
Q-Cel 520 is a hollow glass micro-balloon which can be mixed with just about any resin. Q-Cel will make the
Chopped Strand Mat 600gm
Our CSM 600gm is an emulsion chopped strand mat made of randomly distributed chopped E-glass strands held together by an
Omyacarb 40
Omyacarb is a Medium-ground calcium carbonate filler/extender suitable for most applications where a relatively coarse product is required.
JA7 Alloy Stick
*** Our website cannot supply custom weights, only per/kg – contact our Henderson store for a specific weight, as the average JA7 stick is between 290-420 grams***
Barnes 6L Vacuum System
This vacuum degassing unit is designed to remove air from resin and silicone systems prior to pouring. It is a
