Our Trapeze Ring Mould is a ready to use silicone mould that may be used with a variety of casting materials. An appropriate casting resin such as an epoxy or polyurethane is a popular choice, but other materials like wax may also be used. The mould was made from a ring which was originally sculpted from clay and is handmade in character. Note: all measurements are approximate. Due to the handmade nature of this mould, imperfections may exist in the mould and dimensions may change when cast piece is sanded.
Finish: Semi-Gloss
Resin required to fill: Approx. 10ml
Ring size: U-V
Previous product
Back to products
Slant Ring Mould
$28.75 (inc. gst) $17.25 (inc. gst)
Next product
Low Dome Ring Mould
$28.75 (inc. gst) $17.25 (inc. gst)
Trapeze Ring Mould
$28.75 (inc. gst) $17.25 (inc. gst)
MLD-R14
Available at:
Auckland
Description
Related products
Plastic Putty Knife 1.5 inch
Plastic Putty Knives are the perfect tool for successfully mixing urethane or silicone in large volumes. Flat blade helps scrape
Glossy Cuff Bangle Mould
MLD-B13
Large Carved Bangle Mould
MLD-B16
Small Carved Bangle Mould
MLD-B15
Geltex Latex Thickener
Geltex Latex Thickener is used in latex moulding rubbers. Add up to 2% and shear mix until the desired consistency
Chopped Strand Mat 600gm
Our CSM 600gm is an emulsion chopped strand mat made of randomly distributed chopped E-glass strands held together by an
Icypole Sticks
Icy pole sticks for mixing resins, not recommended for silicone or viscous materials. Great for adding and blending liquid and
Brush Latex
***PLEASE DO NOT USE THIS FOR DIPPING – THIS IS A THICKENED FORMULA FOR BRUSHING***
