The Hex Platter is available in two sizes, 11cm and 20cm in approximate diameter. These ready-to-use silicone moulds may be used with resins such as EPOXYCAST or BQUEEN, acrylic resins like Forton MG, or plasters and gypsums. The finish of the mould is gloss, and the cured platters may be easily stacked on one another. The smaller 11cm platter requires about 80ml to fill, and the 20cm platter requires roughly 260ml to fill. Note: all measurements are approximate. Due to the handmade nature of this mould, imperfections may exist in the mould and dimensions may change when cast piece is sanded.