Super Gold + is a gap filling, medium thickness, and odorless foam safe CA. This adhesive is non-frosting and takes only 2 or 3 seconds longer to bond compared to Insta-Cure and Insta-Cure+. There are no fumes that irritate the nose and eyes. Super Gold + does not attack white foam; therefore, it may be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. Clear plastic will not fog when using this adhesive. An ideal product for attaching clear canopies in plastic model kits; however, MAXI-CURE™ is still recommended for assembling the rest of plastic kits.
Wood can be bonded to white foam with Super Gold + in less than fifteen seconds. For bonding foam to foam, spray a very light fog of INSTA-SET™ to one piece and apply Super Gold + to the other before joining. Excess INSTA-SET™ may create too much heat, which can melt the foam. For better shock absorption use Super Gold + as it cures to a more flexible consistency. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, Super Gold + eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times. Available in a 2oz bottle.
Works Best On:
• Rubber
• White Foam
Works Good On:
• Balsa Wood
• Soft Wood
• Hard Wood
• Glass & Metal
• Fiberglass
• Ceramics
• Hard Plastics
• Laminating
• Water-Resistant
• Reinforcing
• CA Hinges
Directions:
Unscrew top from nozzle. For finer applications, use the extender tip. Apply Super Gold +CA to one side of the parts being joined, then hold them tightly together for 5-15 seconds. For larger bonding areas, apply serpentine beads of the CA with enough spacing to allow for the spreading of the adhesive. Insta-Set™ accelerator must be used when bonding two pieces of foam together. Full strength is reached in three hours. Wipe the nozzle clean before replacing screw-on top. Refrigerate to extend shelf life. Cured CA is stable from -40 to 220° F. Soak extender tip in acetone for cleaning.
