PTFE Tubing 305 is a two foot length of tubing that may be cut off to any length (usually 2″). With one end cut at a 45° angle, can be inserted 1/8″ into Pocket CA top and into #312 top if it is cut down an additional 3/64″. For thin CA (Cyanoacrylate) products.
Previous product
Back to products
Super Gold +
$50.60 (inc. gst) $40.48 (inc. gst)
Next product
Extra CA Top 312
$3.45 (inc. gst) $2.76 (inc. gst)
PTFE Tubing 305
$5.18 (inc. gst) $4.14 (inc. gst)
Available at:
Auckland
Related products
M38 Antique Brown Patina
All Birchwood patinas are considered traditional patinas that will age or darken metal. These patinas are sold concentrated and should
Brass B Coating
The Metal Coatings are ground metal suspended in a non-toxic water based acrylic binder. They may be applied to both
Stainless Black Patina
Stainless Black Patina is made specifically for stainless steel. It is not recommended for other metals, but on zinc and
M20 (Dip) Black Patina
All Birchwood patinas are considered traditional patinas that will age or darken metal. These patinas are sold concentrated and should
Bronze Wool
A high quality bronze wool that is used when buffing or polishing back a bronze surface. This eliminates the problems
Clear Wax For All Metals
The finest quality waxes have been blended into a nonabrasive formula specifically to protect patinas and metal finishes. These waxes
Darkening Patina
Darkening Patina is most commonly used cold on bronze, brass, and copper to produce a beautiful brown finish. This patina
Copper B Coating
The Metal Coatings are ground metal suspended in a non-toxic water based acrylic binder. They may be applied to both
