BJB’s SC-24 is a general purpose accelerator which can be used to reduce demold times of a variety of BJB polyurethane products. Note that this will also shorten the working-time of the polyurethane system after SC-24 is added. SC-24 should be added to the B side prior to mixing with A side in the amount of 1% to 2% of the total weight of the A/B system. A
small scale test should be performed to evaluate the reaction time with the particular product being used. SC-24 will have a varying degree of effectiveness with different material system. We do not recommend using this product with BJB water clear series.
Previous product
Back to products
PTFLEX 50
From $460.00
Next product
TC892 Slow Set Rigid Polyurethane
From $218.50
SC-24 Polyurethane Accelerant
$40.25 (inc. gst)
Description
Related products
Brass Powder
Brass powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
Copper Powder
Copper powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
Pipette Dispenser
An easy and economical way of measuring out those small amounts of MEKP catalyst and colouring resin among other applications.
Langridge Dry Artist Pigment
Langridge Dry Artist Pigments offer gorgeous metallics, intense opaques and vibrant fluoros, that can be used to pigment our resin
AntiCrak Fibre 13mm 500g
The AntiCrak Fibre 13mm 500g is a premium Alkali-Resistant Fiber used for concrete crack control or gypsum casting. Low percentages
Barnes 6L Vacuum System
This vacuum degassing unit is designed to remove air from resin and silicone systems prior to pouring. It is a
Megapour Deep Cast Epoxy Resin
Megapour Epoxy Resin Deep Casting System is an epoxy resin system specifically designed for deep pouring and large castings. It
Surface Tissue
Surface tissue is used in the inner corrosion barrier to form a resin-rich layer, and also in the exterior layer
