BJB’s SC-24 is a general purpose accelerator which can be used to reduce demold times of a variety of BJB polyurethane products. Note that this will also shorten the working-time of the polyurethane system after SC-24 is added. SC-24 should be added to the B side prior to mixing with A side in the amount of 1% to 2% of the total weight of the A/B system. A
small scale test should be performed to evaluate the reaction time with the particular product being used. SC-24 will have a varying degree of effectiveness with different material system. We do not recommend using this product with BJB water clear series.
Previous product
Back to products
PTFLEX 50
From $460.00
Next product
TC892 Slow Set Rigid Polyurethane
From $218.50
SC-24 Polyurethane Accelerant
$40.25 (inc. gst)
Description
Related products
Pipette Dispenser
An easy and economical way of measuring out those small amounts of MEKP catalyst and colouring resin among other applications.
Iron Powder
Iron powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
Isopropyl Alcohol
Isopropyl Alcohol is probably the most essential product to have on hand at any time, especially in the make-up kit.
Megapour Deep Cast Epoxy Resin
Megapour Epoxy Resin Deep Casting System is an epoxy resin system specifically designed for deep pouring and large castings. It
Epoxycast Clear Casting Resin
Epoxycast Clear Casting Resin Epoxycast Clear Casting Resin is a two-part, clear system specifically designed for casting small to medium-sized
AntiCrak Fibre 13mm 500g
The AntiCrak Fibre 13mm 500g is a premium Alkali-Resistant Fiber used for concrete crack control or gypsum casting. Low percentages
Chopped Strand Mat 600gm
Our CSM 600gm is an emulsion chopped strand mat made of randomly distributed chopped E-glass strands held together by an
Aluminium Powder
Aluminium Powder is traditionally added to resins to aid in high temp applications such as vacuum forming. It is commonly
