When adding a liquid pigment to a resin system we suggest you use no more than 5% of the total amount of resin, as a higher percentage may prevent the resin from curing properly.
These dyes may be used to achieve a highly transparent finish (optically clear), or when a higher percentage is added it may achieve a more translucent finish (still maintains clarity but no longer optically clear). A great example of this is when pigment is added to a coating epoxy vs a casting epoxy. When the resin is poured at only a few mm thick, the colour may appear less intense or vibrant compared to a casting application that may be anywhere from 5mm-100mm+ deep.
The PSTF dyes work very well in conjunction with powder pigments such as the Pearl-Ex range of mica powders, and the PolyColor powder pigments. A great example of this is when a project requires a powder pigment, but as these do not disperse and dissolve into the resin, you may use a dye to create a base tone rather than leaving it clear. This can create dimension within the resin pour or re-enforce the powder pigments tone. For example, PSTF in Turquoise mixed with Pearl-Ex Turquoise creates a rich turquoise finish. A colourless powder pigment such as the Diamond Dust PolyColor powder may be used with any PSTF to create a metallic finish in the tone of your choice.
Previous product
Back to products
Opaque Pigment 25ml
$19.55 (inc. gst)
$15.64 – $19.55 (inc. gst)
$15.64 – $19.55 (inc. gst)
Next product
Disposable Apron
$2.30 – $8.05 (inc. gst)
$1.15 – $4.03 (inc. gst)
$1.15 – $4.03 (inc. gst)
PSTF Translucent Pigments 15ml
SKU: PSTF-ABROWN-15
$14.95 (inc. gst)
$11.96 (inc. gst)
The Barnes range of PSTF dyes may be used with Epoxy, Polyurethane, Polyester and UV resins. Adding them to colourless resins is recommended to achieve the most vibrant results. Conduct a small test if you are choosing to use a pre-pigmented resin system.
SKU: PSTF-ABROWN-15
Categories: Casting, Resin Pigments, Translucent Dyes And Inks
Description
Related products
JA8 Alloy Stick
*** Our website cannot supply custom weights, only per/kg – contact our Henderson store for a specific weight, as the average JA8 stick is between 250-400 grams***
Aluminium Granules
$46.00 – $184.00 (inc. gst)
Aluminium Granules are commonly used as a filler in resin moulds for vacuum forming and low pressure injection. Imparts high
Epoxycast Clear Casting Resin
$38.64 – $1,012.00 (inc. gst)
Epoxycast Clear Casting Resin Epoxycast Clear Casting Resin is a two-part, clear system specifically designed for casting small to medium-sized
Langridge Dry Artist Pigment
$22.08 – $73.60 (inc. gst)
Langridge Dry Artist Pigments offer gorgeous metallics, intense opaques and vibrant fluoros, that can be used to pigment our resin
Brass Powder
$41.40 – $331.20 (inc. gst)
Brass powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
JA12 Alloy Stick
*** Our website cannot supply custom weights, only per/kg – contact our Henderson store for a specific weight, as the average JA12 stick is between 210-280 grams***
Industrial Talc
$18.40 – $73.60 (inc. gst)
Industrial Talc is a budget priced filler for reducing cost and exotherm in resins. Also used as a surface tension
JA6 Alloy Stick
*** Our website cannot supply custom weights, only per/kg – contact our Henderson store for a specific weight, as the average JA6 stick is between 220-310 grams***