PlatSil Accelerator accelerates the pour times and demold times of PlatSil products. The addition of 1% Accelerator to the total mixed weight decreases the pour time to 1/3 the normal pour time. The addition of 2% decreases the normal pour time to 1/4. The addition of 3% decreases the normal pour time to 1/6. The demold time will also be reduced. Experiment on a small scale before making a larger mix. NOTES: Add Accelerator to Part B prior to mixing with Part A.
Previous product
Back to products
Geometric 8 Cavity Silicone Mould
$14.95 (inc. gst) $8.97 (inc. gst)
Next product
Platsil Gel-0030 Prosthetic Grade Silicone
From $172.50
PlatSil Accelerator
SKU: SR-PLATACC-S
$132.25 (inc. gst)
SKU: SR-PLATACC-S
Categories: Addition Cure Silicone, Moulding, Silicone Rubber
Related products
Barnes 6L Vacuum System
$632.50 (inc. gst)
This vacuum degassing unit is designed to remove air from resin and silicone systems prior to pouring. It is a
Sale

Close
Eclipse Bangle Mould
Sale

Close
Rounded Square Bangle Mould
Sale

Close
Small Carved Bangle Mould
Tongue Depressors Box 100/Box
$10.35 (inc. gst)
Wooden tongue depressors allow for mixing of resins, silicones and blending pigments.
Plastic Putty Knife 1.5 inch
From $1.73
Plastic Putty Knives are the perfect tool for successfully mixing urethane or silicone in large volumes. Flat blade helps scrape
Chopped Strand Mat 600gm
$12.65 (inc. gst)
Our CSM 600gm is an emulsion chopped strand mat made of randomly distributed chopped E-glass strands held together by an