PlatSil 71R Retarder slows the cure of PlatSil products. Adding 1% of 71R to the total mixed weight roughly doubles the pour time. Adding 2% of 71 R triples the pour time. Experiment to determine the amount that is best suited for your application. Do not exceed 4% as the system may not cure at all. NOTES: Add Part R to Part A prior to mixing with Part B.
PlatSil 71R Retarder
$46.00 (inc. gst)
Related products
Surface Tissue
Surface tissue is used in the inner corrosion barrier to form a resin-rich layer, and also in the exterior layer
Large Carved Bangle Mould
MLD-B16
Plastic Drop Sheet
A Biodegradeable plastic drop sheet to help protect your work space. This sheet has dimensions of 2.6m x 3.6m
Liquid Latex
***ALSO REFERRED TO AS DIP OR SPRAY LATEX***
Geltex Latex Thickener
Geltex Latex Thickener is used in latex moulding rubbers. Add up to 2% and shear mix until the desired consistency
Rounded Square Bangle Mould
MLD-B14
Icypole Sticks
Icy pole sticks for mixing resins, not recommended for silicone or viscous materials. Great for adding and blending liquid and
Plastic Putty Knife 1.5 inch
Plastic Putty Knives are the perfect tool for successfully mixing urethane or silicone in large volumes. Flat blade helps scrape
