Our Dome No.4 Ring Mould is a ready to use silicone mould that may be used with a variety of casting materials. An appropriate casting resin such as an epoxy or polyurethane is a popular choice, but other materials like wax may also be used. The mould was made from a ring which was originally sculpted from clay and is handmade in character. Note: all measurements are approximate. Due to the handmade nature of this mould, imperfections may exist in the mould and dimensions may change when cast piece is sanded.
Finish: Gloss
Resin required to fill: Approx. 15ml
Ring size: S-T
Previous product
Back to products
Dome Ring Variation No.3 Mould
$28.75 (inc. gst) $17.25 (inc. gst)
Next product
Deluxe Full Alanna Head Female Armature
$253.00 (inc. gst)
Dome Ring Variation No.4 Mould
$28.75 (inc. gst) $17.25 (inc. gst)
MLD-R9
Available at:
Auckland
Description
Related products
Measuring Cup 60ml
These 60ml measuring cups can be used to measure small volumes of resin, silicone catalyst, or for decanting small volumes
Surface Tissue
Surface tissue is used in the inner corrosion barrier to form a resin-rich layer, and also in the exterior layer
Large Carved Bangle Mould
MLD-B16
Small Carved Bangle Mould
MLD-B15
Liquid Latex
***ALSO REFERRED TO AS DIP OR SPRAY LATEX***
Plastic Putty Knife 2 inch
Plastic Putty Knives are the perfect tool for successfully mixing urethane or silicone in large volumes. Flat blade helps scrape
Geltex Latex Thickener
Geltex Latex Thickener is used in latex moulding rubbers. Add up to 2% and shear mix until the desired consistency
AntiCrak Fibre 13mm 500g
The AntiCrak Fibre 13mm 500g is a premium Alkali-Resistant Fiber used for concrete crack control or gypsum casting. Low percentages
