Our Dome No.3 Ring Mould is a ready to use silicone mould that may be used with a variety of casting materials. An appropriate casting resin such as an epoxy or polyurethane is a popular choice, but other materials like wax may also be used. The mould was made from a ring which was originally sculpted from clay and is handmade in character. Note: all measurements are approximate. Due to the handmade nature of this mould, imperfections may exist in the mould and dimensions may change when cast piece is sanded.
Finish: Gloss
Resin required to fill: Approx. 15ml
Ring size: S-T
Previous product
Back to products
Tom Thumb Ring Mould
$28.75 (inc. gst) $17.25 (inc. gst)
Next product
Dome Ring Variation No.4 Mould
$28.75 (inc. gst) $17.25 (inc. gst)
Dome Ring Variation No.3 Mould
$28.75 (inc. gst) $17.25 (inc. gst)
MLD-R8
Available at:
Auckland
Description
Related products
Small Carved Bangle Mould
MLD-B15
AntiCrak Fibre 13mm 500g
The AntiCrak Fibre 13mm 500g is a premium Alkali-Resistant Fiber used for concrete crack control or gypsum casting. Low percentages
Measuring Cup 60ml
These 60ml measuring cups can be used to measure small volumes of resin, silicone catalyst, or for decanting small volumes
Barnes 6L Vacuum System
This vacuum degassing unit is designed to remove air from resin and silicone systems prior to pouring. It is a
Geltex Latex Thickener
Geltex Latex Thickener is used in latex moulding rubbers. Add up to 2% and shear mix until the desired consistency
Rounded Square Bangle Mould
MLD-B14
Eye Dropper
Eyedroppers are ideal for adding liquid pigments to resins, or for creating effects in resin art using Isoproyl Alcohol or
Plastic Putty Knife 1.5 inch
Plastic Putty Knives are the perfect tool for successfully mixing urethane or silicone in large volumes. Flat blade helps scrape
