Our Dome No.3 Ring Mould is a ready to use silicone mould that may be used with a variety of casting materials. An appropriate casting resin such as an epoxy or polyurethane is a popular choice, but other materials like wax may also be used. The mould was made from a ring which was originally sculpted from clay and is handmade in character. Note: all measurements are approximate. Due to the handmade nature of this mould, imperfections may exist in the mould and dimensions may change when cast piece is sanded.
Finish: Gloss
Resin required to fill: Approx. 15ml
Ring size: S-T
Previous product
Back to products
Tom Thumb Ring Mould
$28.75 (inc. gst) $17.25 (inc. gst)
Next product
Dome Ring Variation No.4 Mould
$28.75 (inc. gst) $17.25 (inc. gst)
Dome Ring Variation No.3 Mould
$28.75 (inc. gst) $17.25 (inc. gst)
MLD-R8
Available at:
Auckland
Description
Related products
Classic Bangle Mould
MLD-B10
Rounded Square Bangle Mould
MLD-B14
Tongue Depressors Box 100/Box
Wooden tongue depressors allow for mixing of resins, silicones and blending pigments.
Liquid Latex
***ALSO REFERRED TO AS DIP OR SPRAY LATEX***
Icypole Sticks
Icy pole sticks for mixing resins, not recommended for silicone or viscous materials. Great for adding and blending liquid and
Plastic Putty Knife 1.5 inch
Plastic Putty Knives are the perfect tool for successfully mixing urethane or silicone in large volumes. Flat blade helps scrape
Plastic Putty Knife 2 inch
Plastic Putty Knives are the perfect tool for successfully mixing urethane or silicone in large volumes. Flat blade helps scrape
Small Carved Bangle Mould
MLD-B15
