Classic Small Bowl Mould is a ready to use silicone mould. An appropriate casting resin such as an epoxy or polyurethane is a popular choice, but other materials like wax or acrylic resins like Forton MG may also be used. These moulds are made by Barnes using a high quality silicone and may be re-used to create beautiful homewares. This mould was made from a bowl which was turned on a lathe, so there is a lip at the base that makes them stackable. The finish of the mould is satin and the dimensions are approximately 83mm in diameter by 35mm high. Note: all measurements are approximate. Due to the handmade nature of this mould, imperfections may exist in the mould and dimensions may change when cast piece is sanded.
Previous product
Back to products
Circles Bangle Mould
$46.00 (inc. gst) $27.60 (inc. gst)
Next product
Organic Medium Platter Mould
$115.00 (inc. gst) $69.00 (inc. gst)
Classic Small Bowl Mould
$69.00 (inc. gst) $41.40 (inc. gst)
Available at:
Auckland
Related products
Plastic Drop Sheet
A Biodegradeable plastic drop sheet to help protect your work space. This sheet has dimensions of 2.6m x 3.6m
Tongue Depressors Box 100/Box
Wooden tongue depressors allow for mixing of resins, silicones and blending pigments.
Geltex Latex Thickener
Geltex Latex Thickener is used in latex moulding rubbers. Add up to 2% and shear mix until the desired consistency
Brush Latex
***PLEASE DO NOT USE THIS FOR DIPPING – THIS IS A THICKENED FORMULA FOR BRUSHING***
Woven Bangle Mould
MLD-B1
Classic Bangle Mould
MLD-B10
Plastic Putty Knife 3 inch
Plastic Putty Knives are the perfect tool for successfully mixing urethane or silicone in large volumes. Flat blade helps scrape
Forton MG
Forton MG (Forton Modified Gypsum) is a system whereby a polymer additive (Forton VF812) enhances the properties of the alpha
