Classic Small Bowl Mould is a ready to use silicone mould. An appropriate casting resin such as an epoxy or polyurethane is a popular choice, but other materials like wax or acrylic resins like Forton MG may also be used. These moulds are made by Barnes using a high quality silicone and may be re-used to create beautiful homewares. This mould was made from a bowl which was turned on a lathe, so there is a lip at the base that makes them stackable. The finish of the mould is satin and the dimensions are approximately 83mm in diameter by 35mm high. Note: all measurements are approximate. Due to the handmade nature of this mould, imperfections may exist in the mould and dimensions may change when cast piece is sanded.
Previous product
Back to products
Circles Bangle Mould
$46.00 (inc. gst) $27.60 (inc. gst)
Next product
Organic Medium Platter Mould
$115.00 (inc. gst) $69.00 (inc. gst)
Classic Small Bowl Mould
$69.00 (inc. gst) $41.40 (inc. gst)
Available at:
Auckland
Related products
Pipette Dispenser
An easy and economical way of measuring out those small amounts of MEKP catalyst and colouring resin among other applications.
Plastic Putty Knife 1.5 inch
Plastic Putty Knives are the perfect tool for successfully mixing urethane or silicone in large volumes. Flat blade helps scrape
Classic Bangle Mould
MLD-B10
Eclipse Bangle Mould
MLD-B11
AntiCrak Fibre 13mm 500g
The AntiCrak Fibre 13mm 500g is a premium Alkali-Resistant Fiber used for concrete crack control or gypsum casting. Low percentages
Chopped Strand Mat 600gm
Our CSM 600gm is an emulsion chopped strand mat made of randomly distributed chopped E-glass strands held together by an
Surface Tissue
Surface tissue is used in the inner corrosion barrier to form a resin-rich layer, and also in the exterior layer
Plastic Putty Knife 2 inch
Plastic Putty Knives are the perfect tool for successfully mixing urethane or silicone in large volumes. Flat blade helps scrape
