Our Classic Medium Platter Mould is a ready to use silicone mould. An appropriate casting resin such as an epoxy or polyurethane is a popular choice, but other materials like wax or acrylic resins like Forton MG may also be used. These moulds are made by Barnes using a high quality silicone and may be re-used to create beautiful homewares. The platter is part of our classic homewares range, so check out the premade Classic Bowl mould to create a matching set. The diameter is approximately 200mm wide and 20mm in height. The Classic Medium Platter Mould takes approximately 250ml of resin to fill. Note: all measurements are approximate. Due to the handmade nature of this mould, imperfections may exist in the mould and dimensions may change when cast piece is sanded.
Previous product
Back to products
Circles Bangle Mould
$46.00 (inc. gst) $27.60 (inc. gst)
Next product
Organic Medium Platter Mould
$115.00 (inc. gst) $69.00 (inc. gst)
Classic Medium Platter Mould
$103.50 (inc. gst) $62.10 (inc. gst)
MLD-HCP2
Available at:
Auckland
Related products
Tongue Depressors Box 100/Box
Wooden tongue depressors allow for mixing of resins, silicones and blending pigments.
Plastic Putty Knife 1.5 inch
Plastic Putty Knives are the perfect tool for successfully mixing urethane or silicone in large volumes. Flat blade helps scrape
Large Carved Bangle Mould
MLD-B16
Barnes 6L Vacuum System
This vacuum degassing unit is designed to remove air from resin and silicone systems prior to pouring. It is a
Geltex Latex Thickener
Geltex Latex Thickener is used in latex moulding rubbers. Add up to 2% and shear mix until the desired consistency
Measuring Cup 60ml
These 60ml measuring cups can be used to measure small volumes of resin, silicone catalyst, or for decanting small volumes
Glossy Cuff Bangle Mould
MLD-B13
Pipette Dispenser
An easy and economical way of measuring out those small amounts of MEKP catalyst and colouring resin among other applications.
