Aluminium Powder is traditionally added to resins to aid in high temp applications such as vacuum forming. It is commonly mixed with Epoxy Resin and Polyurethanes. Aluminium Powder is also used with resins to create a cold cast metal effect. The powder is mixed with the resin and then buffed or sanded once cured, creating an Aluminium finish. These powders give the ultimate metallic leafing finish in resin. Using only a smalll amount into your resin mix you can achieve the most amazing of metal looking finishes. This Aluminium Powder has an average particle size (D50) of 45 microns.
Previous product
Back to products
Surface Tissue
$7.48 (inc. gst)
Next product
Brass Powder
From $51.75
Aluminium Powder
From $35.65
Related products
Forton MG
Forton MG (Forton Modified Gypsum) is a system whereby a polymer additive (Forton VF812) enhances the properties of the alpha
JA8 Alloy Stick
*** Our website cannot supply custom weights, only per/kg – contact our Henderson store for a specific weight, as the average JA8 stick is between 250-400 grams***
Q-Cel 520
Q-Cel 520 is a hollow glass micro-balloon which can be mixed with just about any resin. Q-Cel will make the
Surface Tissue
Surface tissue is used in the inner corrosion barrier to form a resin-rich layer, and also in the exterior layer
Isopropyl Alcohol
Isopropyl Alcohol is probably the most essential product to have on hand at any time, especially in the make-up kit.
Barnes 6L Vacuum System
This vacuum degassing unit is designed to remove air from resin and silicone systems prior to pouring. It is a
Hanson Mixer
All purpose mixing blades that attach to a power drill to mix quantities of liquid. This brand mixes with less
JA7 Alloy Stick
*** Our website cannot supply custom weights, only per/kg – contact our Henderson store for a specific weight, as the average JA7 stick is between 290-420 grams***
