Platsil Part-H Hardener
Use PlatSil Part H Hardener to increase the Shore hardness of any PlatSil Gel. It also increases working and demold
Vario Catalyst F
By blending VARIO Catalyst and VARIO Catalyst F pot lives between 2 and 60 minutes, and curing times between 15
Silicone Pigments 50gm
Silicone Pigments are suitable for coloring addition and condensation cure RTV silicones. Can also be used to colour your silicone
Sil-Thix Silicone Thickener
Sil-Thix is a unique thickener for most Silicone Mould Making Rubbers. It can be used with both Condensation and Addition
Silicone Diluent
A non-reactive fluid used as a dilutant. When used in small amounts of up to 10% it allows for retention
M4503/T35 Condensation Silicone Rubber
***UPDATE TO M4503 - AS OF 03/07/2023 THIS FORMULA MAY BE USED WITH THIXOTROPIC C - READ TDS FOR DETAILS***
M4470/T37 Silicone Rubber
Elastosil® M4470 is particularly suitable for moulding applications in high elongation and tear resistance can be sacrificed in favour of
Tinsil Gel-10 Silicone Rubber 1.1kg
TINSIL GEL 10 is a pourable, condensation-curing two component silicone rubber that cures at room temperature. Recommended for:Animatronics, SFX skins
Tinsil 70-25 Silicone Rubber 1.1kg
TINSIL 70-25 is a pourable, general purpose, condensation-curing two component silicone rubber that cures at room temperature. Recommended for: Figurines,
Tufsil 28 Condensation Silicone Rubber
Due to the excellent mechanical properties of the cured rubber as well as its high resistance to casting resin, TUFSIL®28
T35 Catalyst
T35 Catalyst is a Catalyst to be used with M4503.
T47 Catalyst
ELASTOSIL® M4503 curing times can be adjusted by the addition and variation of T47 Catalyst. Note that the increase in
