Call Us / Visit us!
--New Zealand Store--
Henderson, Auckland: 09 973 1816 Map
--Australian Stores--
Head office: 1300 731 497 Map
Newtown Store: 02 9557 9056 Map
Chatswood Store: 02 8730 1970 Map
Richmond Store: 03 9428 5511 Map
Brunswick Store: 03 8374 6650 Map
Brisbane Store: 07 3304 6010 Map
Please login or create account
The Classic Medium Platter is a premade silicone mould. The platter is part of our classic homewares range. Check out the premade Classic Bowl mould to create a matching set. Diameter: 200mm round platter Height: 20mm Note: all measurements are approximate. Due to the handmade nature of this mould, imperfections may exist in the mould and...
The Organic Medium Platter is a premade silicone mould. The platter is part of our classic homewares range. Check out the premade Classic Bowl mould to create a matching set.
A pre-made vacuum formed plastic resin mould. Very simple to use and can be reused over and over to obtain many parts. With the use of the correct release agent, most resins including clears such as EASYCAST CLEAR, BQUEEN, Clear Casting Polyester can be poured. Simply place the tray on a level surface, spray a light film of release agent, mix the resin as...
A pre-made vacuum formed plastic resin mould. Very simple to use and can be reused over and over to obtain many parts. With the use of the correct release agent, most resins including clears such as EASYCAST CLEAR, BQUEEN, Clear Casting Polyester can be poured. Simply place the tray on a level surface, spray a light film of release agent, mix the resin as...
A pre-made vacuum formed plastic resin mould. Very simple to use and can be reused over and over to obtain many parts. With the use of the correct release agent, most resins including clears such as EASYCAST CLEAR, BQUEEN, Clear Casting Polyester can be poured. Simply place the tray on a level surface, spray a light film of release agent, mix the resin as...
A pre-made vacuum formed plastic resin mould. Very simple to use and can be reused over and over to obtain many parts. With the use of the correct release agent, most resins including clears such as EASYCAST CLEAR, BQUEEN, Clear Casting Polyester can be poured. Simply place the tray on a level surface, spray a light film of release agent, mix the resin as...
A pre-made vacuum formed plastic resin mould. Very simple to use and can be reused over and over to obtain many parts. With the use of the correct release agent, most resins including clears such as EASYCAST CLEAR, BQUEEN, Clear Casting Polyester can be poured. Simply place the tray on a level surface, spray a light film of release agent, mix the resin as...