Aves Apoxie Sculpt
Apoxie Sculpt 1/4lbs (113g) combines the features and benefits of sculpting clay with the adhesive power of epoxy! Its smooth, putty-like consistency is easy to mix & use. Self-hardens (No Baking); cures hard in 24 hrs., semi-gloss finish. Adheres to nearly any surface. Great for sculpting, embellishing, bonding and filling most anything. Accepts paints, stains, mica powders & more for a variety of finishing options.
Apoxie Sculpt 1/4lbs (113g) repairs Ceramic, Glass, Metal, Stone, Wood and more. Water-proof, non-toxic permanent repair compound, for use in antique restoration, model making, sculpting, taxidermy, arts & craft, toy repair, outdoor displays and many other applications. Measure out two equal parts of A and B, then mix together well, it’s that easy!
Features:
– Self-Hardening
– Putty-like consistency
– 1-3 hour working time
– Highly Adhesive
– Superior Detail
– 0% Shrinkage & Cracking
– Hard & Durable
– Semi-gloss finish
– Waterproof
– Non-flammable
– Marine & Exterior Quality
– Freeze-thaw Stable
Directions
– Wear disposable gloves to measure equal parts of A & B. Always retrieve parts A & B with different tools.
– Mix & knead together for 2 minutes until thoroughly combined and a uniform color is achieved. Note incomplete mixing will give poor results. *Allow mixed product to rest 5 minutes for better handling.
– Apoxie® Sculpt is ready to use; working time is 1- 3 hours. Shape as desired. Smooth or texture with a wet finger, brush, Q-tip or sculpting tool. Self-hardens, 24 hour full cure.
– Clean up: soap & water.
– Finish as desired. Paint wet or dry. Marine & Exterior Quality!
Tips!
– Wear protective gloves e.g., nitrile, when combining parts A and B. Wear a dust mask and safety glasses when sanding cured product.
– Keep out of reach of children. Safe for adults when used as directed.
– A 24 hr. full cure required for hard finishing purposes such as sanding, carving, drilling, machining, etc., without chipping, cracking or flaking. Keep containers sealed when not in use.
– Dipping your tools & fingers in cold water will keep Apoxie Sculpt from sticking to your surfaces and allow maximum details.
Working Time Line Guide:
1/2 hour: Sticky & most adhesive
1 to 2 hours: Easy to work with
2 to 3 hours: Setting up, form-able detail
24 hours: Hard, cured & waterproof
