PT Flex 20 Liquid Rubber is a two-part, liquid polyurethane system that cures (RTV) to a tan, Shore A23-25 rubber. This is the softest rubber in the PT Flex line of polyurethane mold rubbers. PT Flex Series rubbers were specifically designed for prototyping and model making applications and offer fast pour times (~4 minutes) and fast demold times (~2 hours).
Previous product
Back to products
Poly 74-45 80lb
$1,322.50 (inc. gst)
Next product
PTFLEX 70 16lb
$460.00 (inc. gst)
PTFLEX 20 80lb
$1,725.00 (inc. gst)
Available at:
Auckland
Related products
Barnes 6L Vacuum System
This vacuum degassing unit is designed to remove air from resin and silicone systems prior to pouring. It is a
Epoxyglass Clear Coating Epoxy Resin
EPOXYGLASS is a two part ultra clear epoxy coating resin used by professional artists and hobbyists Australia wide. EPOXYGLASS is
Surface Tissue
Surface tissue is used in the inner corrosion barrier to form a resin-rich layer, and also in the exterior layer
Megapour Deep Cast Epoxy Resin
Megapour Epoxy Resin Deep Casting System is an epoxy resin system specifically designed for deep pouring and large castings. It
Bronze Powder
Bronze powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
Hanson Mixer
All purpose mixing blades that attach to a power drill to mix quantities of liquid. This brand mixes with less
D-Limonene 1L
DLIM-S
Chopped Strand Mat 600gm
Our CSM 600gm is an emulsion chopped strand mat made of randomly distributed chopped E-glass strands held together by an
