Pure Lube Mould Soap is a versatile lubricant for use as a mould separator. A pure liquid (non-detergent) soap seperator, used as a release when casting plaster/gypsum into a plaster mould, and to prevent plaster/gypsum products from adhering to most porous surfaces. Pure Lube may be used at full strength or diluted with water. Apply witha clean sponge until foam appears, dab off excess and repeat the process until a sheen appears.
Previous product
Back to products
Resin Mould Wax 50g
$25.30 (inc. gst)
Next product
PVA Release
From $28.75
Pure Lube Mould Soap
SKU: R-PMS-T
From $18.40
SKU: R-PMS-T
Categories: Moulding, Release Agents, Casting, Release Agents
Related products
Q-Cel 520
From $103.50
Q-Cel 520 is a hollow glass micro-balloon which can be mixed with just about any resin. Q-Cel will make the
JA12 Alloy Stick
$212.75 (inc. gst)
*** Our website cannot supply custom weights, only per/kg – contact our Henderson store for a specific weight, as the average JA12 stick is between 210-280 grams***
Hanson Mixer
From $57.50
All purpose mixing blades that attach to a power drill to mix quantities of liquid. This brand mixes with less
Sold out

Close
Barnes 6L Vacuum System
$632.50 (inc. gst)
This vacuum degassing unit is designed to remove air from resin and silicone systems prior to pouring. It is a
Chopped Strand Mat 600gm
$12.65 (inc. gst)
Our CSM 600gm is an emulsion chopped strand mat made of randomly distributed chopped E-glass strands held together by an
Sold out

Close
Surface Tissue
$7.48 (inc. gst)
Surface tissue is used in the inner corrosion barrier to form a resin-rich layer, and also in the exterior layer
JA7 Alloy Stick
$48.30 (inc. gst)
*** Our website cannot supply custom weights, only per/kg – contact our Henderson store for a specific weight, as the average JA7 stick is between 290-420 grams***
Aluminium Powder
From $35.65
Aluminium Powder is traditionally added to resins to aid in high temp applications such as vacuum forming. It is commonly