AF-7 Anti-Foaming Agent has been developed as an extremely effective, air release agent for Water Clear polyurethane material systems. Its purpose is to assist in the vacuum degassing procedure by reducing surface tension of entrained air bubbles in the mix. When stirred in to already mixed A & B components, the AF-7 Anti-Foaming Agent works to break the material surface tension. This product is sold in a pint/approx. 473ml in volume.
Note: AF-7 does not replace the need for pulling a vacuum on casting materials to eliminate air.
Previous product
Back to products
Apoxie Sculpt 4lbs
$195.50 (inc. gst)
Next product
Square Armature Wire
$82.80 (inc. gst)
AF-7 Anti-Foaming Agent
$69.00 (inc. gst)
Description
Related products
JA8 Alloy Stick
*** Our website cannot supply custom weights, only per/kg – contact our Henderson store for a specific weight, as the average JA8 stick is between 250-400 grams***
Aluminium Granules
Aluminium Granules are commonly used as a filler in resin moulds for vacuum forming and low pressure injection. Imparts high
Epoxycast Clear Casting Resin
Epoxycast Clear Casting Resin Epoxycast Clear Casting Resin is a two-part, clear system specifically designed for casting small to medium-sized
Langridge Dry Artist Pigment
Langridge Dry Artist Pigments offer gorgeous metallics, intense opaques and vibrant fluoros, that can be used to pigment our resin
Omyacarb 40
Omyacarb is a Medium-ground calcium carbonate filler/extender suitable for most applications where a relatively coarse product is required.
Chopped Strand Mat 600gm
Our CSM 600gm is an emulsion chopped strand mat made of randomly distributed chopped E-glass strands held together by an
D-Limonene 1L
DLIM-S
Q-Cel 520
Q-Cel 520 is a hollow glass micro-balloon which can be mixed with just about any resin. Q-Cel will make the
