This material allows the user to laminate fibreglass moulds directly onto wet clay. The vinyl spray is applied to the clay surface as a barrier coat to seal in any moisture from the clay sculpt or walls. Use in conjunction with a suitable release agent such as J-Wax. The Vinyl Spray also imparts some protective properties to the sculpt while the moulds are being produced.
Previous product
Back to products
WC786 Water Clear Rigid Polyurethane
From $368.00
Next product
Brown Microcrystaline Wax
$36.80 (inc. gst)
Vinyl Strip Spray 400g Can
SKU: VSS-CAN
$40.25 (inc. gst)
Available at:
Auckland
SKU: VSS-CAN
Categories: Moulding, Release Agents, Casting, Release Agents
Related products
Forton MG
From $51.75
Forton MG (Forton Modified Gypsum) is a system whereby a polymer additive (Forton VF812) enhances the properties of the alpha
Brass Powder
From $51.75
Brass powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
Aluminium Granules
From $57.50
Aluminium Granules are commonly used as a filler in resin moulds for vacuum forming and low pressure injection. Imparts high
Isopropyl Alcohol
From $19.55
Isopropyl Alcohol is probably the most essential product to have on hand at any time, especially in the make-up kit.
JA6 Alloy Stick
$230.00 (inc. gst)
*** Our website cannot supply custom weights, only per/kg – contact our Henderson store for a specific weight, as the average JA6 stick is between 220-310 grams***
AF-7 Anti-Foaming Agent
$69.00 (inc. gst)
AF-7 Anti-Foaming Agent has been developed as an extremely effective, air release agent for Water Clear polyurethane material systems. Its
JA7 Alloy Stick
$48.30 (inc. gst)
*** Our website cannot supply custom weights, only per/kg – contact our Henderson store for a specific weight, as the average JA7 stick is between 290-420 grams***
Industrial Talc
From $18.40
Industrial Talc is a budget priced filler for reducing cost and exotherm in resins. Also used as a surface tension